Application data for VFX paints only

VFX Paints give excellent coverage and dry to a totally matt non reflective finish.

Our VFX Paints are water based, produced using pure pigment for high definition colour.

As with all Bristol Paints the substrate should be clean and degreased.

If a new cloth is being used, priming is recommended prior to application of the VFX Paint

Our VFX Paints require a maximum two-coat application for a fast and economic finish. Coverage is approximately 6.5 m2 per litre, this may vary depending on the porosity of the substrate as well as the density of paint applied.

VFX Paint can be applied by brush, roller, conventional pressure pot system as well as airless spray systems. Spray gun tip and filter need to be compatible.

Providing substrate is suitable primed, studio floors can also be painted using VFX Paint. Call for further information.

All VFX Paints are’ non fire stimulating’ and can be applied over any suitable fire resistant substrate without effecting existing FR rating.